Mbm-corporation 102 User Manual download pdf (Page 17)

T10087 Febrary 1999

Stapler Folder Model 102 Operator Manual

3.7 Jam indications

Staple(s) missing indicator

The staple(s) missing indicator is illuminated when a set is missing one or

two staples. The model 102 will automatically shut down the on-line system

when this indicator is lit. Check/replace the staple cartridge(s) according

to section 4.1.

Stacker full indicator

The stacker full indicator is illuminated when the belt stacker is full. Re-

move the completed sets.

Paper jam indicator

The paper jam indicator is illuminated when an operation in the Model 102

is not done within the preset time. Open the top cover and remove the

jammed sets reachable.

If necessary:

• Lift the fold roll guide cassette.

• Turn the upper fold roll using the open end wrench at the hex grip at the

front side of the roll. The Model 102 is delivered with an open end

wrench for that purpose in the tool box.

• Press the staple stop down and move the paper guides apart.

• Fold down the fold roller guide cassette and reposition the paper

guides. There is a magnetic lock holding the paper guides together.

Close the top cover and the model 102 will automatically purge remaining

jammed sets.

Staplers or side joggers incorrectly positioned indicator

The staplers or side joggers incorrectly positioned indicator is illuminated

when the distance between the side jogger and the stapler is to narrow.

Check/adjust the position of the staplers according to section 3.2. Switch

the power off and then on again to reset the position of the side joggers.

3-10

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

No comments

Mbm-corporation 102 User Manual Page 17